Moisture Traps

 

Moisture Traps

Moisture traps, which remove moisture, are recommended for detector support gases and carrier gases.

High purity moisture removal traps contain molecular sieve for highly-efficient drying.

 

 

Model 500 Mol. Sieve Drying Trap

 

- 500 cc of molecular sieve 5A in this metal trap reduces moisture to less than 1 ppm at most instrument flow rates of 2 L/min.

- Internal 20 µm frits at each end prevent particle contamination of your instruments.

- The Model 500 will remove water from over 20 standard cylinders of compressed air.

- The trap can be regenerated by baking under helium flow at 200°C for 4 hours, venting to the hood.

- Approximate dimensions: 2'' x 14'' with fittings.

- Maximum pressure is 1000 psig.

- It is shipped filled with high-purity helium.

- Packaged: 16-1/4" x 3-1/4" x 3" Cardboard Box; Weight: 1,383.5 g

 

Model 500 Mol. Sieve Drying Trap

 

 

Description

Part No

1/4" Model 500 Mol. Sieve Drying Trap

202272

1/8" Model 500 Mol. Sieve Drying Trap

202270

 

 

 

 

ZPure™ Glass Moisture Trap

 

ZPure Glass Moisture Trap

This is an advanced-design gas filter for applications requiring high-efficiency moisture removal with the benefit of a depletion indicator. Up to 6 grams water is removed to low-ppb levels. The adsorbing materials are Molecular Sieve 5A and cobalt-free CoFree™ indicator, held in a sturdy glass tube. The gas to be purified contacts only glass, metal and the adsorbents.

CoFree changes color from greenish-yellow to blue at about 5% relative humidity to signal leaks in the system; the molecular sieve removes moisture to trace levels. The glass tube is sealed with a special dual sealing system for extra protection from leaks. An internal frit at each end prevents particulate contamination. The inner glass tube in the CRS ZPure Moisture Trap is enclosed in a plastic outer tube for safety. Dimensions: 3.5 cm x 26 cm, maximum pressure 6.8 bar (100psig).

Dual Seal Design: In this design the glass inner tube is protected by a sealed outer plastic tube. Even if the glass tube fails, the gas system is fully protected against leaks.

Packaged: 13"x 2" x 2-1/4" Cardboard Box; Weight: 476.2 g

 

 

Description

Part No

ZPure™ Glass Moisture Trap, 1/4", Brass

202235-B

ZPure™ Glass Moisture Trap, 1/4", Stainless Steel

202235-SS

ZPure™ Glass Moisture Trap, 1/8", Brass

202234-B

ZPure™ Glass Moisture Trap, 1/8", Stainless Steel

202234-SS

 

 

 

ZPure™ H2O Purifier

 

ZPure H20 Purifier

 

• High capacity; reduces moisture to low ppb levels.

Removes water from inert gases, air or hydrogen to less than 20 ppb at flow rates up to 2 L/min.

 

 

Description

Part No

ZPure H2O, 1/8” Brass Fittings

202230-B

ZPure H2O, 1/8” Stainless Steel Fittings

202230-SS

ZPure XL H2O, 1/8” Brass Fittings

202230XL-B

ZPure XL H2O, 1/8” Stainless Steel Fittings

202230XL-SS

ZPure H2O, 1/4” Brass Fittings

202231-B

ZPure H2O, 1/4” Stainless Steel Fittings

202231-SS

ZPure™ XL H2O Purifier - 1/4" Brass Fittings

202231XL-B

ZPure™ XL H2O Purifier - 1/4" Stainless Steel Fittings

202231XL-SS

 

 


ZPure™ XL H2O Purifier

 

ZPure™ XL H2O Purifier

• Extra large capacity hydrocarbon filter
• Approximate dimensions 5 x 50 cm including fittings

ZPure XL H2O Purifier removes water from inert gases, air or hydrogen.

 

 

Description

Part No

ZPure™ XL H2O Purifier - 1/4" Brass Fittings

202231XL-B

ZPure™ XL H2O Purifier - 1/4" Stainless Steel Fittings

202231XL-SS

ZPure™ XL H2O Purifier - 1/8" Brass Fittings

202230XL-B

ZPure™ XL H2O Purifier - 1/8" Stainless Steel Fittings

202230XL-SS

 

 

 

 

 

 

About Us

Contact Us